BERNINA 770 QE

BERNINA 770 QE

En high-end-maskine til syning og quiltning

  • BERNINAs griber med 9 mm stingbredde
  • BERNINA stingregulator (BSR) inklusiv
  • Patchworkfod 97D inklusiv
  • BERNINA overtransportør
  • Moderne, enkel betjening
Dette produkt er ikke længere tilgængeligt

En nyere version af denne model er tilgængelig BERNINA 770 QE PLUS

Læs mere

BERNINA 770 QE – High-end-symaskinen i Quilters Edition

Perfekt spænding til perfekte sømme

  • Ideel spænding til hver type sting
  • Opnå de fineste stingresultater
  • En nyskabelse fra BERNINA
Når først spændingen er indstillet efter den tråd og det stof, der anvendes, vil BERNINA's adaptive trådspænding kontinuerligt kontrollere trådspændingen og automatisk foretage justeringer, hvis det er nødvendigt.

Masser af plads kun til dig

Masser af plads kun til dig

  • Skab smukke syprojekter
  • Lav store quilte på en behagelig måde
  • Indbygget broderifunktion
Få glæde af en forlænget friarm på hele 330 mm med 254 mm plads til højre for nålen Plus: det valgfri ekstrastore broderimodul tillader dig at sy motiver i maksimal størrelse.

 Støjsvag og præcis syning

Støjsvag og præcis syning

  • Egner sig ideelt til pyntesømme
  • Sy i længere tidsrum
  • Mere tid til din kreativitet
BERNINA griberen syr sting med største præcision op til 9 mm i bredden, og med hastigheder op til 1.000 søm pr. minut. Trådspolen rummer 70 % mere tråd end normale spoler.

Altid ensartede sting!

Altid ensartede sting!

  • Opnå perfekte sting af samme længde
  • Perfekte resultater uanset hastigheden
  • Perfektion bliver standard
BSR-foden er den revolutionerende syfod, der ubesværet sikrer ensartet stinglængde ved frihåndssyning af ligesømme og zigzagsømme

Sy silke og læder som en professionel

Sy silke og læder som en professionel

  • Håndter specialmaterialer med lethed
  • Glatte eller fine stoffer indføres jævnt
  • Optimal synlighed under syning
Den nyskabende BERNINA overtransport er nem at aktivere og gemmes helt væk, når den ikke behøves.

Quilter and fabric designer Tula Pink talks about her BERNINA
"BERNINA 770 QE giver mig den plads, jeg har brug for til q uilting, og stingregulatoren kan ikke overgås mht. lige søm.”Tula Pink, Quilter og tekstildesigner

Tula Pink leger med motiverne på samme måde som en poet leger med ord og forvandler intetsigende, traditionelle designs til drilagtige små væsener. Tulas kærlighedsaffære med tekstiler begyndte tidligt og en besættelse med syning fulgte snart efter. Tula begyndte at quilte i et forsøg på at opbruge hendes stadig voksende beholdning af stoffer, så hun kunne retfærdiggøre købet af endnu mere. I dag, 16 år senere, er hun en anerkendt designer og quilter. Tula Pink har designet et quilt fra sin stofsamling, «Moonshine», eksklusivt for BERNINA.

Se video
Forelsket i Patchworkfod #97D

Forelsket i Patchworkfod #97D

  • Designet til ligesømme
  • Ideel til syning af sømmerum på ¼ tomme
  • Ekstra forsikring til erfarne patchworksyere
Patchworkfoden #97D med flytbar sømguide er specialtilbehøret til den mest præcise fremføring og ved syning af patchworkblokke.

Automatiske funktioner sparer tid

Automatiske funktioner sparer tid

  • Ingen manuel afskæring ved afslutning af en søm
  • Oplev halvautomatisk trådning
  • Ingen manuel sænkning af syfoden
Tråd afskæres automatisk, når du når enden på en søm eller en farveændring i broderi. Trykfoden sænkes automatisk ved begyndelsen af en søm.

Spørg din on-screen support

Spørg din on-screen support

  • Nyd intuitiv navigering
  • Find den relevante nål og fod
  • Vejledninger vil hjælpe dig
Sykonsulenten og de indbyggede vejledninger tilbyder direkte support på skærmen og svar på dine spørgsmål til enhver tid, dag eller nat.

Egenskaber og funktioner

  • Overblik
  • Syning og quiltning
  • Overordnede funktioner
  • Broderi
  • Sting
BERNINA 770 QE

Bemærk:
Ikke alle modeller og alt tilbehør er tilgængelige i alle lande. Vi forbeholder os ret til at foretage ændringer i både funktioner og design.

Syplads til højre for nålen 254 mm
Farvetouchskærm 4.3” / 10 cm
Gribersystem BERNINA griber
Automatisk trykfodsløft
Justerbart trykfodstryk
Tutorial i syning
Maksimal stingbredde i mm 9

Produktbrochure – Alle oplysninger på samme sted

Download nu

Bemærk:
Ikke alle modeller og alt tilbehør er tilgængelige i alle lande. Vi forbeholder os ret til at foretage ændringer i både funktioner og design.

Maksimal syhastighed 1000
Maksimal stingbredde i mm 9
Maksimal stinglængde mm 6
Nålepositioner 11
Automatisk knaphul/ måling af knaphulslængde
Manuel flertrinsknaphulsfunktion
USB-port til USB-stik
Memory (korttidshukommelse)
Sykonsulent
Drag & drop
Mønstergentagelse (op til 9) 1-9
Funktion til afslutning/påbegyndelse af mønster
Pattern end programmable
Spejle
Ændring af mønsterlængde

Produktbrochure – Alle oplysninger på samme sted

Download nu
Omvendt syning
Automatisk sikkerhedsfunktion
Programmerbar sikkerhedsfunktion
BSR-funktionalitet
Start/stop-tast (syning uden fodpedal)
Pivot / hover function
Samlet antal sting (inkl. alfabeter) 992
Syalfabeter 6
Pyntesting i alt 286
Program til påsyning af knapper
Knaphuller (inkl. øsken) i alt 13
Nyttesting i alt 30
Quiltsting 50
Stoppeprogrammer 2
Særlige dekorative sting designet af Tula Pink -
Syplads til højre for nålen 254 mm
Farvetouchskærm 4.3” / 10 cm
Multifunktions-drejeknapper
Sylampe 30
Automatisk nåletråder
Manuel trådafskærer 3
Ændring af sting under syning
Automatisk tilpasset trådspænding
BERNINA Dual Transport
Gribersystem BERNINA griber

Gribersystem

Gribersystemerne på BERNINA-symaskiner udvikler sig konstant gennem årene. CB-griberen er den traditionelle BERNINA-mekanisme, der frembringer den legendariske BERNINA-stingkvalitet med en bredde på 5,5 mm.

BERNINAs roterende griber tilbyder samme stingkvalitet ved en stingbredde på 9 mm og overvågning af undertråden.

Den innovative BERNINA-griber bevarer den legendariske BERNINA-stingkvalitet ved stingbredder på 5,5 mm og 9 mm. En nem indføring af spolekapslen og spole med stor kapacitet gør denne ideel.
Opspoling under syning/brodering
BERNINA frihåndssystem (FHS)
BERNINA fodpedal med back-kick-funktion

Produktbrochure – Alle oplysninger på samme sted

Download nu
Nålestop oppe/nede
Automatisk trykfodsløft
Automatisk trådafskærer
Justerbart trykfodstryk
Undertrådsovervågning
Overtrådsovervågning
Tutorial i syning
Onscreen-hjælp
Eco modus
Hastighedsregulator
Maskinens vægt 14 kg
Maskinens størrelse 522 / 214 / 358 mm
Maksimale broderihastighed (sting pr. minut) 1000
Maksimalt broderiareal 400x210 mm
Friarmsbroderi
Integreret broderimønster 140
Broderialfabeter 6
Prøve behandling i displayet: flip, rotere, skalere
Drag and Drop
Hæftning
Reducer antal farveskift
Lagring af egne broderimønstre
Programmerbar skæring af forbindelsessting

Produktbrochure – Alle oplysninger på samme sted

Download nu
Smart hæftning
Usynlig hæftning
Tråd væk-tilstand
Broderimønsterformat EXP, DST, PES, PEC, JEF, SEW, PCS, XXX
Import /eksport af design via USB
Automatisk genkendelse af broderiramme
Kontrol af broderiforløb
Gem sidste broderiposition
Broderimodul opt.
Stort broderimodul (SDT) valgfri

Stort broderimodul (SDT)

Det nye BERNINA-modul med Smart Drive-teknologi (SDT) løfter din broderioplevelse med forbedret stingkvalitet, flydende og mere støjsvage bevægelser og op til 55 % større broderihastighed.
Jumbo-hoop-funktionalitet, begrænset broderiområde 400×210 mm
  • Nyttesømme

  • Knaphuller

  • Pyntesømme

  • Quiltesømme

Tilbehør

Slip din kreativitet løs med det medfølgende tilbehør, og vær forberedt på enhver kreativ udfordring med et stort udvalg af ekstraudstyr

  • Inkluderet
  • Kompatibel
Vis alle Skjul alle

Bemærk:
Ikke alle modeller og alt tilbehør er tilgængelige i alle lande. Vi forbeholder os ret til at foretage ændringer i både funktioner og design.

Vejledninger

  • BERNINA 770 QE: The best technology for quilters

    Some sewing. Some quilting. Some huge possibilities. The BERNINA 770 QE combines innovation with plenty of space. The extended free-arm creates an extra-wide work area, with 254 mm space to the right of the needle for large quilt projects. The fast and quiet BERNINA Hook sews high-precision stitches up to 9 mm in width. The bobbin holds up to 70 % more thread than standard bobbins. Both the BERNINA Stitch Regulator (BSR) and the BERNINA Dual Feed come as standard. The BSR ensures beautiful, even stitches when free-motion quilting, whilst the Dual Feed effortlessly handles difficult and fine fabrics, or multiple layers, by feeding from both the top and the bottom. The B 770 QE can also be upgraded with an embroidery module to add a further dimension to your work.

  • 1/10 BERNINA 770 QE: First steps

    The BERNINA 720, 740 and 770 QE allow even absolute sewing novices to achieve excellent results. This video tutorial will take you through setting up your BERNINA, step by step. This ranges from threading to replacing the presser foot – all done in a few simple steps. The generously proportioned and ultra-clear touch screen with touch stylus pen also means it couldn’t be easier to change settings, such as the winding speed and selected stitches. The scroll function facilitates easier and more intuitive navigation through the program, and tips and further information on the individual functions and stitches are a click away via the Help function. The set-up program also features numerous options for individual settings, which gives you the chance to customise the BERNINA completely in line with your own wishes and preferences – from the language setting and the display colour scheme to the sound settings.

  • 2/10 BERNINA 770 QE: Change stitches

    The BERNINA 720, 740 and 770 QE make sewing decorative seams fun! Simply use the touch pen to pick out your choice of stitch on the large and clear display and then adjust the width and length of the stitch with the practical multifunction knobs. The decorative stitch menu lets you select your preferred choice of stitch from numerous available options. But that’s not all – you also have plenty of extra scope to fine-tune the selected stitch to get it just the way you want it, play around with the stitch density and length of the pattern or create a mirror image. All this can be configured comfortably on your display, which also lets you preview what the modified stitch will look like beforehand.

  • 3/10 BERNINA 770 QE: Combining letters and stitches

    As you will see in this tutorial, sewing text is child’s play with the BERNINA 720, 740 and 770 QE, even for total beginners. Simply select a font and type in the text that you want to sew. It is particularly quick and convenient thanks to the clear display and easy handling with the touch pen stylus. Once you have decided on a stitch, you can continue configuring the entire combination until you are satisfied with the end result. To make things easier, you can also use the preview function which illustrates the combination on the display. If your creation looks the part, the combination you have input is then automatically sewn. If you want to reuse your design at a later stage, it is easy to open your personal program and store your combination permanently.

  • 4/10 BERNINA 770 QE: Sewing buttonholes and sewing on buttons

    Sewing buttonholes and sewing on buttons is a breeze with the BERNINA 720, 740 and 770 QE. All you have to do is choose the buttonhole you want from the menu and then configure the cutting width using the multifunction knobs. BERNINA has also included a particularly smart feature to make sure the buttonhole fits: you can hold the button against the display and then use the multifunction knobs to configure the right button size. Once the buttonhole has been programmed, use the BERNINA buttonhole foot with slide to sew the buttonholes in a single step. This can be repeated as often as you want. You can also save the data for subsequent use. Finally, the optional presser foot number 18 or 20/20C and the button-sewing program make the process of sewing on buttons just as easy.

  • 5/10 BERNINA 770 QE: Sewing with the BERNINA Stitch Regulator (BSR)

    Free-motion sewing and quilting – creative techniques that allow you extraordinary scope to create new designs. The BERNINA 720, 740 and 770 QE will double your sewing fun, because the BERNINA stitch regulator, or BSR for short, makes free-motion quilting child’s play. The BSR foot makes each stitch exactly the same length during free-motion sewing, resulting in a neat and even stitch pattern. After attaching the stitch regulator, you can access configuration options via the display. Novice quilters will appreciate the BSR mode 2, which stops the BERNINA when the fabric is not moved. Letting you work with reassurance and full focus on your sewing piece. All three models offer BSR functionality. The BERNINA 770 QE includes the BERNINA stitch regulator as an accessory on delivery, while it is an optional add-on extra for the BERNINA 720 and 740.

  • 6/10 BERNINA 770 QE: Sewing with Dual Feed

    The BERNINA Dual Feed – one of the smartest and most helpful features you’ll find on the BERNINA 740 and 770 QE. In this tutorial we will show you what this clever helper can do. With simultaneous upper and lower fabric feeds, the Dual Feed allows for precise seam tracking and guarantees accurate results, even with multi-layer, extra-thick or difficult to move textiles. The video instruction clearly shows you how to use it during patchwork or quilting work. It also shows how to successfully handle sewing work when accuracy is crucial, for example when you have to handle patterned fabrics. With multiple fabric layers, the BERNINA Dual Feed feature prevents the individual layers from shifting against each other, even with slippery or badly moving materials such as leather, viscose, silk or elastic. You will be astounded at just how easy and convenient sewing can be with the Dual Feed.

  • 7/10 BERNINA 770 QE: Sewing in zippers

    Sewing in zippers is a task few look forward to. But with the technology of the BERNINA 720, 740 and 770 QE machines it can be a pleasure, as our video tutorial demonstrates. Simply select the type of fabric and the zipper from the display. The BERNINA then automatically calculates the optimal settings for the stitching and needle position. All you need to do then is to pin the zipper to the fabric, attach presser foot number 4 or 4D and follow the instructions. You have even more control over the sewing process with the needle-stop function. Sewing in the zipper is now almost as if by magic – all with the BERNINA precision you have come to know and love.

  • 8/10 BERNINA 770 QE: First steps when embroidering

    This video tutorial shows you that thanks to clever BERNINA innovations, even absolute beginners can use their BERNINA 720 or 770 QE to create exquisite embroidery. Step-by-step, our instructions show you how to proceed to get the best results – from selecting the settings to installing the embroidery module and changing the stitch plate through to inserting the needle and the right choice of foot and embroidery hoop. All this means you will be ready to tackle your project in no time, accurately and precisely, and even first-timers can expect to produce impressive results.

  • 9/10 BERNINA 770 QE: Single-colour pattern embroidery

    This tutorial will teach you how you can embroider a single-colour pattern with unbeatable accuracy using the BERNINA 720 or 770 QE. The instructions take you step-by-step through the required settings, all conveniently shown on the generously sized display. You will also learn how you can adjust the embroidery motif by turning and scaling your sewing piece – easy and intuitively with the multifunction knob. All the while, the display lets you precisely monitor how the embroidery will be positioned on your material. One particularly clever feature: even a broken thread during the embroidery is no cause for alarm – the thread breakage tool lets you repeat the embroidering process after re-starting in precisely the same spot you were in when the breakage happened. The result? Perfectly embroidered beautiful motifs, precisely matching your piece of sewing.

  • 10/10 BERNINA 770 QE: Care and cleaning

    The designers have thought of your comfort when it comes to cleaning and caring for the BERNINA 720, 740 and 770 QE. In this video tutorial, we will show you how easy it is to look after your BERNINA and ensure many years of trouble-free operation. All parts prone to deposition of dust and textile fibres during sewing are easily accessible and can be cleaned with minimal effort using the care set provided in the delivery package. The instructions show you step-by-step how to prepare your BERNINA for the cleaning process, how to clean and care and the right place to apply a few drops of oil to ensure friction-free, smooth running of components. Simply spread the oil by running a few blank stitches through the unit – and your BERNINA is once again ready for your textile creations.

  • The BERNINA hook – the heart of the BERNINA 7 Series

    The heart of the BERNINA 7 Series features a novel, centrally placed driver, which allows the BERNINA Hook to run fast yet quietly. The BERNINA Hook sews high-precision stitches up to 9 mm in width with speeds up to 1,000 stitches per minute. The bobbin holds up to 70% more thread than standard bobbins allowing you to sew longer without interruption.

  •  BERNINA 770 QE: The best technology for quilters

    BERNINA 770 QE: The best technology for quilters

  • 1/10 BERNINA 770 QE: First steps

    1/10 BERNINA 770 QE: First steps

  • 2/10 BERNINA 770 QE: Change stitches

    2/10 BERNINA 770 QE: Change stitches

  • 3/10 BERNINA 770 QE: Combining letters and stitches

    3/10 BERNINA 770 QE: Combining letters and stitches

  • 4/10 BERNINA 770 QE: Sewing buttonholes and sewing on buttons

    4/10 BERNINA 770 QE: Sewing buttonholes and sewing on buttons

  • 5/10 BERNINA 770 QE: Sewing with the BERNINA Stitch Regulator (BSR)

    5/10 BERNINA 770 QE: Sewing with the BERNINA Stitch Regulator (BSR)

  • 6/10 BERNINA 770 QE: Sewing with Dual Feed

    6/10 BERNINA 770 QE: Sewing with Dual Feed

  • 7/10 BERNINA 770 QE: Sewing in zippers

    7/10 BERNINA 770 QE: Sewing in zippers

  • 8/10 BERNINA 770 QE: First steps when embroidering

    8/10 BERNINA 770 QE: First steps when embroidering

  • 9/10 BERNINA 770 QE: Single-colour pattern embroidery

    9/10 BERNINA 770 QE: Single-colour pattern embroidery

  • 10/10 BERNINA 770 QE: Care and cleaning

    10/10 BERNINA 770 QE: Care and cleaning

  • The BERNINA hook – the heart of the BERNINA 7 Series

    The BERNINA hook – the heart of the BERNINA 7 Series

Ofte stillede spørgsmål

Kan jeg bruge no brand spoler?

Vi anbefaler kun at bruge BERNINA kvalitetsspoler, da brug af no brand spoler kan forårsage utilstrækkelig trådspænding og andre problemer.

Hvor ofte bør maskinen smøres?

Smøringsfrekvensen afhænger af antallet af syede sting. Vi anbefaler at lægge en dråbe olie på griberbanen, inden du syer i længere tid, men i det mindste når maskinen beder dig om dette. Ved syning af større projekter kan du smøre maskinen en gang om dagen.

Maskinen kører meget langsomt.

Kontroller skydehastighedskontrollen på forsiden af maskinen, og før den mod højre. Her kan du angive  den maksimale hastighedsindstilling , når du syer med fodpedalen, eller bruge den til at justere hastigheden, når du arbejder med start/stop-knappen.
 

Ved brodering afklippes forbindelsesstingene ikke

Ikonet "Automatisk trådklip" i syningstilstand er ikke aktiv.
 Klippelængden på de forbindende sting er indstillet for højt. For at ændre dette skal du gå til "
Setup-Program ", "Broderiindstillinger", "Automatisk trådklip" og reducere værdien.

Maskinen syr på stedet

Der kan være flere grunde til dette:
Undertransportøren er nede.
Stinglængden er indstillet til meget lille.

Hvad skal jeg gøre, hvis meddelelsen om gear vises?

Klip overtråden af, hæv syfoden, løft forsigtigt stoffet for at afskære undertråden og eventuelle snoede tråde. Træk ikke! Fjern stoffet. Fjern spolehuset, åbn krogen for at kontrollere, om der er en tråd, der er sammenfiltret i krogområdet og fjern den. Kontroller også, om der er tråde under nålepladen. Udskift krogen, spolehuset, spolen og nålepladen. Kontroller, om overtråden er trådt korrekt, og tråd den igen om nødvendigt.

Hvad bruger man den lodrette spoleholder til?

Den er nødvendig, når du bruger yderligere en tråd, for eksempel ved syning med tvillingenålen.
Til stablede (parallelt viklede) tråde skal du bruge den lodrette spolepind for at lade tråden løbe jævnt af spolen.
Vigtigt: brug skumgummipladen som base.

Skærmen reagerer ikke

Skærmen skal kalibreres. Vælg "Setup-Program", "Maskine indstillinger" og "Skærmkalibrering", følg herefter instruktionerne på skærmen.

Syfoden løftes automatisk lidt efter sænkning

Syfodens svævehøjde er ikke indstillet til 0.
Vælg "Setup-Program", "Sy indstillinger", "Programmer Funktionstasterne/funktionsikonerne" og indstil værdien for "Justerbar svæve position" til 0.

Overtrådskontrollen svarer ikke

Overtrådskontrollen er deaktiveret i "Setup-Program". Vælg "Setup-Program", "Overvågningsfunktioner" og "Indstil Overtrådsindikator".

Undertrådskontrollen svarer ikke

Der kan være flere årsager til dette:
Døren til krogdækslet er åben. Luk den.
Sensoren til undertrådskontrollen er beskidt og skal rengøres.
Undertrådskontrollen er deaktiveret under "Setup-Program". Vælg "Setup-Program", "Overvågningsfunktioner" og "Activating the lower thread indicator".

Support til din BERNINA 770 QE

For at sikre, at du har glæde af din BERNINA så længe som muligt, anbefaler vi, at du læser den detaljerede betjeningsvejledning. Yderligere supportoplysninger samt firmwareopdateringer finder du på supportsiden.

HENT MANUALEN SUPPORTSIDE BERNINA 770 QE

Få personlig rådgivning i din lokale BERNINA forretning

Over 2.000 BERNINA forretninger verden over tilbyder nyttige tjenester til alle vore kunder. Din lokale BERNINA forretning er stolt af at kunne hjælpe dig med rådgivning om de maskiner og det tilbehør, der passer bedst til dine behov, valg af BERNINA broderisoftware og servicering af din BERNINA.