Downloads
These are the officially approved software updates from BERNINA.
Firmware for machines
deco 330 update to V1.2 »
Version 1.2 of the deco 330 firmware removes the restriction to use BERNINA ATA Personal Design Cards only.
My Label
My Label: Modification T-shirt with Shoulder Yoke »
The next My Label Style Variant for the summer will soon be here!
My Label: Modification Summertunic »
The next My Label Style Variant for the summer will soon be here!
My Label: Modification Wraparound Skirt »
We’ll begin with an easy modification of the My Label ‘Basic Skirt’
BERNINA My Label SP1 (inkl. Windows Vista™ compatibility »
Installation Manual in English, German and French
BERNINA My Label SP1 in English and German
Embroidery Software V5
EConPC Rel. 3.1 for BERNINA embroidery software V5 »
New EConPC Rel 3.1 for all users of BERNINA embroidery software V5 (BES V5) with an aurora sewing-/embroidery system.
Service Pack 2 for the BERNINA embroidery software V5 »
(The Service Pack 1 for the BERNINA embroidery software V5 is integrated in the Service Pack 2.)
Driver
BERNINA Embroidery Software - Dongle Driver for Windows 7 »
Current dongle driver (security key) for BERNINA Embroidery Software and Windows 7 as an operating system.
Aurora driver for 64-Bit Windows operating systems »
Provide of the aurora sewing machines driver WHQL-certificated for 64-Bit Windows XP / Vista operating systems.
ArtDesign V1.0
BERNINA embroidery software ARTDesign V1 - EConPC Rel3.1 »
New EConPC Rel 3.1 for all users of BERNINA embroidery software ARTDesign V1 with an aurora sewing-/embroidery system.
Embroidery Software V4
EConPC Release2 Service Pack1 »
In controlling the middle basing point, a misalignment of approx. 3 mm/ 0.12 inch was detected. This service pack aligns the basing point correctly.
Update EditorLite V4 with EConPC v1to v2 for aurora »
This patch enables to use the mega-hoop with aurora embroidery module and embroidery software EditorLite V4.
Error Message: AKSUSB.SYS file not found »
During installation of the dongle driver, the error message 'AKSUSB.SYS file not found' may appear.
Border calculator
Update – BERNINA Border Calculator Version 1.5 to 1.6 »
If you are currently using BERNINA Border Calculator Version 1.5 (the version that can be seen in the main window above on the left, near the icon), we recommend that you install the latest update to version 1.6. This update fixes all known bugs of version 1.5. In particular, a change to a point instead of a comma as a decimal symbol is no longer necessary.
User manual
Additions for manual artista 730 (and artista 200) »
This additional manual, in English and German, is intended for users of an artista 730 or artista 200 with firmware version 01.04.51 BSR (refer to setup menu, Information). It contains important handling and maintenance information.
Your BERNINA dealer can load the version 01.04.51 BSR to your machine.
old Downloads
Unencrypt Software for Decoding Encrypted Embroidery Designs »
Many of the embroidery designs for the artista 200 that are stored on CD (BERNINA artista 200 Encrypted Design Collection CD) are encrypted, and can only be opened and edited in the artista 200 CD-ROM drive. OESD and BERNINA International have developed this unencrypt software in order to allow the existing encrypted embroidery designs to be used on all kinds of data carriers.
CPS 4.1 software update for virtuosa 155 (Patch 4.1.3) »
This patch only applies to the Virtuosa 155! All other BERNINA Sewing Computers do not need this patch.