Kaffe Fassett: Zipper Pouch

Grado de dificultad Avanzado
Tiempo requerido una semana y más
Imprimir

Share

2 bags on a white table, one has a big embroidered flower in yellow and red, the other has a purple rectangle with quilted flower pattern. Some fabric scraps can be seen in the background.

Materials:

  • Fabric 1: 12" (30.5 cm) at fabric width
  • Fabric 2: 6 x 6" (15.5 x 15.5 cm)
  • Fabric 3: 7 x 7" (17.8 x 17.8 cm)
  • Fabric 4: 12 x 16" (30.5 x 40.7 cm)
  • Fabric 5: 12" (30.5 cm) at fabric width (inner bag)
  • Batting 22 x 28" (56 x 71 cm), we use Vlieseline volume fleece 278 Soya Mix
  • Vlieseline embroidery stabilizer Stitch-n-Tear, Vlieseline Soluvlies (wash-away stabilizer), Vlieseline H 250 to stabilize the inner bag cotton
  • Temporary adhesive (optional)
  • Zipper 13 3/4" (35 cm) with 1 zipper pull, or endless non-metal zipper 16" (40 cm)
  • Mettler Silk Finish Cotton 60, Sewing Thread Seralon/Metrosene
  • Embroidery Thread Poly Sheen (Isacord), Bobbinfil white
  • Fabric starch spray


Machine:

Picture: Kaffe Fassett Zipper Pouch

Measurements for finished sampler

Our measurements are in inch/imperial system. The finished sampler for the Zipper Pouch measures 14 1/2 x 20 1/2" and is made with 4 different fabrics. You may use scraps up to 12 x 16" in various designs. The inner bag requires 12" at the width of the fabric. For details refer to Materials above and Cutting of Fabric below.

Schedule Tip:
 
The large flower designs by Kaffe need between 60 to 120 minutes to embroider, depending on design, machine, embroidery module and embroidery speed. It might therefore be worth starting the embroidery and then cut the other fabrics into the respective pieces.
 

Cutting of Fabric

Picture: Kaffe Fassett Zipper Pouch

Fabric 1 (yellow):

  • 1x square and then cut diagonally once to make 2 triangles (one is in the sampler), size 10 7/8 x 10 7/8"
  • 2x strip, size 14 1/2 x 2 1/2"
  • 2x strip, size 4 1/2 x 6 1/2"
  • 2x strip, size 2 1/2 x 10 1/2"
  • 1x strip for handle, size 7 x 3"
  • 2x squares for tabs, size 2 x 2"
Fabric 2 (blue): 1x square and then cut diagonally once to make 2 triangles, size 5 7/8 x 5 7/8"

Fabric 3 (green): 1x square, size 6 1/2 x 6 1/2"

Fabric 4 (grey): Small square for embroidery, cut suitable to the Midi Embroidery Hoop. The small square will be cut after embroidery with the Fussy Cutting method. Size 12 x 16"

Fabric 5: Inner bag, size 10 1/2 x 14 1/2"

Stabilizers:
 
  • 1x Batting, size 24 x 30"
  • 2x Embroidery Stabilizer Stitch-n-Tear, suitable to the Midi Embroidery Hoop, size 12 x 16"
  • 1x Vlieseline Soluvlies (wash-away stabilizer), suitable to the Midi Embroidery Hoop, size 12 x 16"
  • 2x Vlieseline H 250, size 10 1/2 x 14 1/2"

Tip:
 
This project is based on quilting techniques, the measurements indicated are in " (inch). For piecing we use a 1/4" seam allowance and recommend using the Patchwork Foot #97D with Guide. It eases exact guiding of the respective seam allowance.
 

Picture: Kaffe Fassett Zipper Pouch

  • Cut all fabrics.
  • Cut all stabilizers.
  • Press the stabilizer to the inner bag fabric pieces.
  • Stabilize the fabric to be embroidered with fabric starch.

Kaffe Large Bloom Embroidery

Picture: Kaffe Fassett Zipper Pouch

Preparation

  • Attach embroidery module and lower the feed dog.
  • Attach the straight stitch plate, the Drop-Shaped Embroidery Foot #26 and a SUK/Embroidery needle.
  • Thread the bobbin with bobbin thread, using the yellow high thread tension bobbin case.
  • Thread the upper thread with Poly Sheen embroidery thread.

Picture: Kaffe Fassett Zipper Pouch

  • Remember to confirm the stitch plate and/or presser foot in the touch screen whenever you change.
  • Hoop the starched fabric together with two layers of Stitch-n-Tear and one layer of wash-away stabilizer into the Midi Embroidery Hoop. (Alternatively the Medium Hoop can be used for our design smaller than 4 x 4).

Tip:
 
Use temporary adhesive to stick the embroidery stabilizer with the wash-away stabilizer and the fabric.
 

Picture: Kaffe Fassett Zipper Pouch

Embroidery

  • Select the stitch design. We use the Kaffe designs folder 11 and select the large flower 3.
  • The design remains centered in the embroidery hoop and size remains unchanged.
  • Embroider the design.
  • Cut back the wash-away stabilizer, then wash it out.
  • Tear away excess stabilizer layers.

Picture: Kaffe Fassett Zipper Pouch

  • For the Fussy Cut we prepared a template of 5 x 5", respectively with seam allowance of 1/4" a template of 5 1/2 x 5 1/2".
  • For that template we "upcycled" a colored plastic folder.
  • Place the template with the grain over the embroidery and mark the cutting line, then cut out, 5 1/2 x 5 1/2".

Patchwork

Picture: Kaffe Fassett Zipper Pouch

Prepare the machine for sewing

  • Activate the Feed Dog & Needle stop down.
  • For piecing we use the straight stitch plate.
  • Attach Patchwork Foot #97D and select stitch 1303 for piecing, with a length 2 mm.
  • Deactivate securing stitches (in the Setup Program).

Picture: Kaffe Fassett Zipper Pouch

  • Thread the machine with Seralon/Metrosene (black sewing bobbin case).
  • Attach the Slide-on Table.
  • Patchwork Foot #97D with Patchwork Seam Guide eases precise stitching of 1/4" seam allowances.
  • A design wall helps to place the pieces. Lay out all your pieces on a flat surface and check if you are happy with the arrangement and the combination of patterns & colors.

Picture: Kaffe Fassett Zipper Pouch

Piecing

  • First sew the small triangles to the edge of the embroidered square.
  • Press the seam allowances towards the printed triangles.
  • Cut back excess seam allowance of the triangle corners.
  • Sew this patch to the edge of the large triangle.
  • Press the seam allowance towards the large triangle.

Picture: Kaffe Fassett Zipper Pouch

  • Sew the strips of 2 1/2 x 10 1/2 onto two opposite sides.
  • Press the seam allowance towards the strips.
  • Now you have the first piece of 10 x 14", respectively 10 1/2 x 14 1/2".

Picture: Kaffe Fassett Zipper Pouch

  • Onto two opposite sides of the large square 6 1/2 x 6 1/2", add the pieces of 4 1/2 x 6 1/2".
  • Press the seam allowance towards the printed fabric.

Picture: Kaffe Fassett Zipper Pouch

  • Add the strips of 2 1/2 x 14 1/2" at the opposite other sides of the square.
  • Press the seam allowances towards the strips.

Picture: Kaffe Fassett Zipper Pouch

  • Place the two rectangles of 10 1/2 x 14 1/2" right sides together and stitch together along the 14 1/2" edge.
  • Press the seam allowance away from the triangles.
  • Now you have your sampler of 20 1/2 x 14 1/2".

Picture: Kaffe Fassett Zipper Pouch

  • Place the batting (cut 25 x 29") under the sampler, having an excess seam allowance of 4" on each side. That will allow you to hoop and embroider/quilt the pieces along the edge.

Picture: Kaffe Fassett Zipper Pouch

  • Baste the sampler onto the batting. We use the basting function on the machine, stitch 30, the Straight Stitch Plate and Embroidery Foot #26.
  • When sewing basting stitches, the machine sews one stitch, you pull the fabric back at the desired stitch length and sew the next stitch.

Picture: Kaffe Fassett Zipper Pouch

  • We recommend one line of basting stitches through the short center and then stitching along the edges on all four sides.

Computerized Quilting

Picture: Kaffe Fassett Zipper Pouch

  • For quilting in the embroidery hoop, go to the Setup Program and select the material thickness, set to 7.5mm. That will make sure that the hoop does not shift while the needle is still in the fabric.

Picture: Kaffe Fassett Zipper Pouch

Quilt design 1

  • Select the Kaffe folder 11, select design 31: the 6 x 6" design fits onto the square fabric piece.
  • Hoop the 6 x 6" square of the quilt sampler centered in the Midi Embroidery Hoop.

Picture: Kaffe Fassett Zipper Pouch

  • Quilt the design.
  • This technique is used in many other projects and widely named as "Computerized Quilting".

Picture: Kaffe Fassett Zipper Pouch

Quilt design 2

  • Next, in the Kaffe folder, select design 22, this 4.7 x 8" design fits over the large triangle.

Picture: Kaffe Fassett Zipper Pouch

  • Hoop the large triangle parallel to the long triangle seam and centered into the Midi Embroidery Hoop.
  • Attach the embroidery hoop to the module.

Picture: Kaffe Fassett Zipper Pouch

  • By pointing onto different corner stitches, check that the design fits onto the triangle. Use the multi-function knobs if required to move or turn the design as required.
  • Have the machine quilt the design.

Picture: Kaffe Fassett Zipper Pouch

Quilt Design 3

  • Next, re-hoop the sampler in the Midi Embroidery Hoop to cover the small triangle along the edge for quilting.

Picture: Kaffe Fassett Zipper Pouch

  • In the Kaffe folder, select design 27, 5.5 x 4.5".
  • Reduce the design size to 80%. For the small triangle along the edge, turn the design by approx. 220°.

Picture: Kaffe Fassett Zipper Pouch

  • Place the design over the triangle, leaving a seam allowance of 3/8" along the edge un-stitched.
  • Placement depends on your hooping.
  • Quilt the design.

Picture: Kaffe Fassett Zipper Pouch

  • Re-hoop the samples to allow quilting the remaining small triangle.
  • Turn and move the 80% sized design so that it fits over the triangle.

Picture: Kaffe Fassett Zipper Pouch

  • Quilt the design.
  • Un-hoop the sampler and press it.

Sewing the Zipper Pouch

Rückansicht des Quiltstücks

Prepare the machine for sewing

  • 9 mm Stitch Plate
  • Reverse Pattern Foot #1D, activate Dual Feed.
  • Thread the machine with Seralon/Metrosene.
You need the sampler, the two pieces for the inner bag, the squares for the tabs, the strip for the handle and the zipper.

Picture: Kaffe Fassett Zipper Pouch

Tabs and handle

  • For the tabs, fold two opposite edges towards the center, wrong sides together, press.
  • Then fold the piece in half, press.

Picture: Kaffe Fassett Zipper Pouch

  • For the handle and fold the seam allowance in (like a double fold bias), press for topstitching.

Picture: Kaffe Fassett Zipper Pouch

  • Topstitch the handle near the folded edges.
  • Press the handle.

Tip:
 
For topstitching along or next to an edge, the Edgestitch Foot #10D is ideal (depending on the machine it is an optional accessory). 
 

Picture: Kaffe Fassett Zipper Pouch

  • Optional: embellish the handle with a decorative stitch, for example with stitch 7104, one of the exclusive Kaffe design stitches.
  • Use the Open Embroidery Foot #20C for best view onto the stitching area.

Picture: Kaffe Fassett Zipper Pouch

Adding the inner fabric and zipper

  • Attach the Patchwork Foot #97D, activate Dual Feed and select the straight stitch.
  • Place the inner bag fabrics right on right.
  • On one 14" edge, mark an 8" turning opening in the middle of the seam. Using a 1/4" seam allowance, sew the pieces together on either side of the turning opening, secure the stitches near the opening. Press the seam allowances apart.

Picture: Kaffe Fassett Zipper Pouch

  • Place the outer bag/samples onto the inner bag, joining middle seams, right on right.
  • Trim inner fabric to match.

Picture: Kaffe Fassett Zipper Pouch

  • Attach the Zipper Foot #4D, activate Dual Feed.
  • Using a ready-made zipper (our example of 13 3/4" length), it is easier to attach the zipper onto the outer bag fabric first and then attach the inner bag onto both. For that, a stitch length of 4 is sufficient.

Picture: Kaffe Fassett Zipper Pouch

  • Place the inner fabric onto the sampler, right sides together.

Picture: Kaffe Fassett Zipper Pouch

  • Stitch together following the stitches of the first seam.

Picture: Kaffe Fassett Zipper Pouch

  • Turn the project, right side out. Remove any visible basing stitches along the zipper.
  • Topstitch along the zipper seam and press.

 

Picture: Kaffe Fassett Zipper Pouch

  • Position the taps on both ends of the zipper, right on right side. Baste in place with a few stitches.
  • To ease this step, place the project over the freearm.

Picture: Kaffe Fassett Zipper Pouch

  • Attach the Straight Stitch Plate and Patchwork Foot #97D.
  • Use the straight stitch, stitch length 3.5.
  • Turn the fabrics by placing outer bag and inner bag right side on right side each.
  • Open the zipper. Align the zipper with the middle seam of inner and outer bag.

Picture: Kaffe Fassett Zipper Pouch

  • Pin all four layers together.
  • Stitching slow and careful in the area of the zipper ends, sew the seam with a seam allowance of 1/4".
  • Press.

Picture: Kaffe Fassett Zipper Pouch

  • Turn the bag through the opening in the inner bag, right side out.
  • Where visible, remove the basting threads along the side seam and in the bag center.

Picture: Kaffe Fassett Zipper Pouch

  • Attach the 9 mm Stitch Plate and Reverse Pattern Foot #1D (or Edgestitch Foot #10D), activate Dual Feed.
  •  Close the turning opening, stitching along the edge.

Picture: Kaffe Fassett Zipper Pouch

  • For the handle, mark on one side seam, from the center 2 1/2" to both sides. The pouch will be 5" wide, 5" high and 9" long.

Picture: Kaffe Fassett Zipper Pouch

  • Place the handle loosely over the side seam and 1/2" over the mark.
  • Baste in place with a few stitches.

Picture: Kaffe Fassett Zipper Pouch

Corners and inside compartements

  • Turn the pouch, wrong side out.
  • Mark the end points of the corners to be sewn, 2 1/2" in from side seam and folded edge, i.e. eight marks.

Picture: Kaffe Fassett Zipper Pouch

  • Fold the bag corners.
  • Mark the sewing lines between the corner markings.
  • Use pins to hold the handle in place.
  • Stitch the corners.

Picture: Kaffe Fassett Zipper Pouch

  • Finished? Nearly. The icing on the cake are the two inner compartments.

Picture: Kaffe Fassett Zipper Pouch

  • To produce them, the tips of the sewn corners are stitched together. We recommend the Button Sew-on Program, stitch 60, with its programmed securing stitches.

Picture: Kaffe Fassett Zipper Pouch

  • Foot 20C, the Open Embroidery Foot, offers good view for precise sewing.

Finish!


You are finished with your zipper pouch! Use it for sewing accessories, fabric markers or paints, writing materials, other small items, cosmetics or as a travel companion.

Blooms for your sewing room!

Kaffe Fassett encourages people to play with colors and create something beautiful. The B 570 QE Kaffe Edition is a tribute to his art and an invitation to let your creativity bloom.

Discover the B 570 QE Kaffe Edition

Fancy some more inspiration?

Then sign up for the BERNINA blog newsletter and stay informed about our latest blog posts, freebies, quilt alongs and much more!

Sign up to the newsletter