Picture: BERNINA 830 - Firmware V34.21.51

Support - BERNINA 830

Firmware V34.21.51

BERNINA 830 - Firmware V34.21.51

For the BERNINA 830 a new firmware is available. 11 June 2014

Check firmware version on your BERNINA 830 sewing machine

Go to the "Setup" of your BERNINA 830 sewing machine by clicking on the soft key:

Open the Information section

Press the "hand" button three times

On the information screen of your BERNINA 830 you will see the firmware version information of your machine.
Does any of the first 3 Versions (Soft Ware, Data or Bootloader) has a lower value as shown below, an update is recommended.

Version Software:  34.21.51
Version Bootloader:  02.04.14 
EMB Applikation Version:
(only shown if the embroidery module is attached)		  01.00.10
 

Previous firmware versions:


Firmware Version:  As download available since:
V34.14.51  09.04.2014
V32.44.80  13.11.2012
V32.42.60  29.10.2012
V31.29.41  26.07.2011
V30.16.20  18.05.2010
V29.39.00  22.10.2009
V29.21.40  08.06.2009
 

Note

As a reminder, when updating the machines with new FW it is crucial that the process is being done with the embroidery module and the BSR foot disconnected.
The single machine must be updated first. Afterwards, when the BSR foot or the embroidery unit is automatically loading the appropriate FW into these modules.
Not updating the machine first can result in undesirable performance behavior of the machine and the embroidery module.