Sewing instructions - Bianca Blouse by Sue O’Very

Difficulty level Intermediate
Time to Complete Weekend
Print

Share

White Blouse with embroidered Flowers on Sleeves and Neckline

Supplies:

  • Fabric: 44/45” (112 cm) wide - 2-1/3 yards (2.13 m) 60”     (153 cm) wide - 1-1/2 yards (1.37 m)
  • 1/3 (0.3 m) yard Fusible Interfacing - f.e. Shapeflex by Pellon
  • Optional accessories:​ Free embroidery file, embroidery thread Polysheen in 11 colours (Mettler), wash away stabilizer, e. g. Avalon Fix (Madeira), tailors hem

 

Machine

Preparations

Fabric Suggestions
 

Cotton, Rayon, Voile, Linen, and other light to medium weight woven materials. Extra fabric recommended to match one-way prints, plaids, or stripes.

  • Cut pattern pieces accordingly. Information about how to measure for the correct size can be found in the pattern download on the right or here.
  • Transfer front and back darts to fabric with marking pen or transfer paper and tracing wheel.
  • Serge with 4-Thread overlock around the outside of the Front, Back, Top Sleeve, and Bottom Sleeve.
  • Press the scratchy side of the Fusible Woven Interfacing Front and Back Facings to the wrong side of the Front and Back Facings, follow manufacturers pressing instruction. These are now the Front and Back Facing pieces. Serge each shoulder seam of the Front and Back Facings flat with 4-Thread overlock.

Picture: Bianca Blouse by Sue O’Very

Embroidering

  • Depending on the material, use appropriate stabilizer and hooping methods for the materials.
  • If using a woven material, fuse the Iron on Tear-Away stabilizer to the wrong side of the fabric, hoop and embroider the two sleeves and the front neck area.
  • Use bobbin yarn as bobbin thread when embroidering. 

Sewing

Picture: Bianca Blouse by Sue O’Very

Darts:

  • Fold darts right sides together and stitch with regular sewing machine, back stitch at the beginning and end of each dart.
  • Press darts flat with an iron: Press front darts towards the bottom hem and press back darts towards center.

Back view of the dress

Facings:

  • Place the Front and Back Facing pieces right side together and sew the shoulder seams. This is now the Facing. Press the Facing seams flat and then press seams open.
  • Serge around the outside of the Facing. Do not serge the neckline of the Facing as this will be stitched and cut down in the next step.

Picture: Bianca Blouse by Sue O’Very

  • Place the Front and Back blouse right sides together and sew shoulder seams. Press seams flat and then press seams open.
  • Pin Facing right sides together with the Front/Back neckline. Sew Facing to the Front/Back neckline and trim seam to ¼” and clip center “V”.
  • Press neckline seam towards the Facing side. Stay stitch Facing to neckline seam allowance.
  • Press Facing open, then fold wrong side of Facing to touch wrong side of Front/Back neckline, press flat.
  • With “stitch-in-ditch” method, tack Facing at shoulder seams. Give the neckline a finishing press.

Picture: Bianca Blouse by Sue O’Very

Side Slit:

  • With Front and Back blouse right sides together, sew side seam from under the armhole to the top “T” notch on side seam pieces. Press side seams flat. This is the top of the side slit.
  • Press side seams open from under the armhole to the bottom hem. Top stitch each side slit using 3/8” stitching from the hem to the top of the slit, across, and down to the other side.
  • Press hem up 1” towards the wrong side. Hem bottom of blouse on the front and back with ¾” top stitch. When top stitch is finished, press the hem, side seams, and slits flat.

Tip

Use an edgestitch foot or seam guide for perfectly straight top stitching.

Picture: Bianca Blouse by Sue O’Very

Sleeves:

  • With your favorite gathering method, gather the top portion of the Bottom Sleeve at ¼” to fit into the bottom portion of the Top Sleeve. Place right sides together, pin and stitch the two sleeve pieces right side together. Repeat with second sleeve.
  • Press each sleeve seam towards the Top Sleeve and top stitch securing the sleeve pieces together so the gathers lay nicely. Press sleeve flat.

Picture: Bianca Blouse by Sue O’Very

  • Fold each sleeve right sides together aligning the sleeve inseam. Pin together and sew, notice the notched out portion of the Bottom Sleeve for the hem and follow the seam when stitching.
  • Press each sleeve inseam flat and then open, clip into the 1” hem notch as needed. Press up the 1” hem and stitch with ¾” top stitch.
  • Sleeves are finished and ready to be set into armhole.

Picture: Bianca Blouse by Sue O’Very

The last steps

  • Slightly gather the top portion of the sleeve cap from front “T” notches to back “T” notches to help ease the sleeve cap into the armhole. Pin in place right sides together and sew sleeves into armholes.
  • Press sleeve seams with a tailors ham towards the blouse.
  • Give final press to the blouse and wear!

Finished!

Start your 30-day Free Trial

 

The BERNINA Embroidery Software 9 offers numerous new features designed to make creating embroidery fast, easy and rewarding.

See for yourself and start the Free Trial!

Try for free

Fancy some more inspiration?

Then sign up for the BERNINA blog newsletter and stay informed about our latest blog posts, freebies, quilt alongs and much more!

Sign up to the newsletter