Bild: BERNINA 710 Firmware V34.05.30

Support - BERNINA 710

Firmware V34.05.30

BERNINA 710 - Firmware V34.05.30

For the BERNINA 710 a new firmware is available.

Check the firmware version of your BERNINA 710

Go to the “Setup” of your BERNINA 710 sewing computer by clicking on the soft key:

Open the information section:

Press the symbol:

On the screen of your BERNINA 710, you will see which firmware versions are installed on your machine.

On the screen of your BERNINA 710, you will see which firmware versions are installed on your machine. If any of the first three (Firmware, Data, Bootloader) versions have a lower value as shown below, an update is recommended.

Version Software: V34.05.30
Data: V34.05.30
Version Bootloader: 02.00.12
EMB Application version:
(only shown if the embroidery module is
attached)
01.00.10