Bild: BERNINA ArtDesign V1 - EConPC Rel3.1 for Windows® XP / Windows Vista™ 32-Bit

Support - BERNINA ArtDesign V1

EConPC Rel3.1

BERNINA embroidery software ArtDesign V1 - EConPC Rel3.1 für Windows® XP / Windows Vista™ 32-Bit

(Update: 08/15/2010) New EConPC Rel 3.1 for all users of BERNINA embroidery software ARTDesign V1 with an aurora sewing-/embroidery system and Windows® XP / Windows Vista™ (32-Bit only) operating system.

Note:

Windows® 7 and Windows Vista™ 64-Bit Operating systems need the "BERNINA ArtDesign V1 - Service Pack 2", the SP2 includes the EConPC V3.1.
The Service Pack 2 can be downloaded free of charge from www.bernina.com/downloads .

Brief Description

After BERNINA Embroidery Software ARTDesign V1 was installed for the Windows Vista™ operating system, it was not always possible to start up the EconPC application without an error message. On the attempt to send embroidery data from the BERNINA Embroidery Software ARTDesign V1 to a connected aurora sewing machine, various error messages which prevented the start-up of the EconPC application would occasionally be displayed. After further attempts, it was possible to transfer the embroidery data to the EconPC application. With the EConPC Rel 3.1 update, this problem has been eliminated.
Note: Every computer may be assembled and configured differently, which may mean differences from the messages and figures shown here. The different configurations may affect the behaviour of the BERNINA Embroidery Software or the EConPC program.

Requirements

 To allow you to install EconPC Version 3.1, it is essential that the following requirements be met:
  1. One of the following operating systems is installed on your computer:
    Windows® XP SP3 / Windows Vista™ SP2 32-Bit
  2. An operating BERNINA embroidery software ARTDesign V1.0G (incl. Service Pack1 for BERNINA ARTDesign V1) installed on your Computer.
  3. Your embroidery computer is one of the aurora models.
  4. Administrator rights for your computer.
Windows® 7 and Windows Vista™ 64-Bit Operating systems need the "BERNINA ArtDesign V1 - Service Pack 2", this can be downloaded free of charge from www.bernina.com/downloads .
If the following BERNINA Embroidery Software ARTDesign version is installed on your computer, we recommend the prior installation of Service Pack 1 for BERNINA ARTDesign V1:
  • BERNINA embroidery software ARTDesign V1.0D

Note:

The information as to which BERNINA Embroidery Software ARTDesign V1 version is installed on your computer can be gleaned from  'Help – About…'  from the main menu bar of your installed BERNINA Embroidery Software.

 


Service Pack 1 for BERNINA Embroidery Software ARTDesign V1...

  • ...is available for Importers and Dealers on the Infogate (Ref. No.: 13391). 
  • ...can be downloaded free of charge by end customers fromwww.bernina.com/downloads
    (one-off registration necessary).

Datei-Informationen

Dateiname Dateigrösse Inhalt
EConPC_Rel31_ARTDesign.zip ca. 8 MB EConPC V3.1 mit ADX V7.14:
beinhaltet: Hotfix für EConPC V2
Installationsanleitung EConPC Rel 3.1 0.46 MB Installationsanleitung

Wichtig:
Damit das EConPC Rel31 Update auf ihrem Windows® XP SP3 / Windows Vista™ SP2 (32-Bit) Computer installiert werden kann, muss zwingend die BERNINA Sticksoftware ArtDesign V1G installiert sein.

Für EConPC Rel 3.1 muss ".NET Framework 1.1" nicht mehr deinstalliert werden, EConPC Rel 3.1 verwendet ".NET Framework 2.0", dass wird zusammen mit der BERNINA Sticksoftware ArtDesign V1 installiert.

We recommend that you install EConPC Rel 3.1 on each computer on which the BERNINA Embroidery Software ARTDesign V1 is installed and on which the aurora sewing-/embroidery system is used to embroider.