Standard accessories BERNINA 770 QE PLUS

#
3 Spool discs
Spool discs hold the thread spool in place for proper release of thread from the spool.
#
2 Foam pads
The foam pad prevents the thread from getting hooked at the spool pin.
#
Seam ripper
The seam ripper is an indispensable tool to ando stitches or to cut buttonholes open.
#
Height compensation tool
The height compensation tool levels an angled position of the presser foot sole when sliding over thick seams.
#
Selection of needles
The needle assortment contains different versions and sizes of needles for all the common applications.
#
Angular Torx wrench
Using the angular Torx wrench the headframe can be opened.
#
Screwdriver Torx, gray
Use the gray screwdriver Torx to change the needles.
#
Screwdriver red
The red screwdriver is supplied as an all-round tool.
#
Brush
The brush is used to clean the feed dog and the hook area.
#
Power cable
The power cable connects the machine with the power supply system.
#
Programmable Foot control
Via the foot control the machine is started and stopped. The speed of the machine is also controlled via the foot control.
#
Bobbins (Set of 5)
To wind the bobbin thread.
#
Seam guide, right
To align regular seam distances.
#
Soft Cover with pocket
The soft cover protects from dust and contamination.
Note:
Not all models and accessories are available in all countries. We reserve the right to make changes in both features and design.