Standard accessories for BERNINA 735

Bobbins (Set of 5)

To wind the bobbin thread.

Soft Cover with pocket

The soft cover protects from dust and contamination.

3 Spool discs

Spool discs hold the thread spool in place for proper release of thread from the spool.

2 Foam pads

The foam pad prevents the thread from getting hooked at the spool pin.

Seam ripper

The seam ripper is an indispensable tool to ando stitches or to cut buttonholes open.

Height compensation tool

The height compensation tool levels an angled position of the presser foot sole when sliding over thick seams.

Screwdriver Torx, gray

Use the gray screwdriver Torx to change the needles.

Screwdriver red

The red screwdriver is supplied as an all-round tool.

Angular Torx wrench

Using the angular Torx wrench the headframe can be opened.

Brush

The brush is used to clean the feed dog and the hook area.

Power cable

The power cable connects the machine with the power supply system.

Programmable Foot control

Via the foot control the machine is started and stopped. The speed of the machine is also controlled via the foot control.

Seam guide, right

To align regular seam distances.

Note:
Not all models and accessories are available in all countries. We reserve the right to make changes in both features and design.