Standard accessories for BERNINA 325 and 335

#
Dust cover (B 335 only)
The dust cover protects your machine from dust and contamination.
#
Accessory bag
The accessory bag serves the purpose to store the supplied accessories as well as the optional accessories.
#
Power cable
The power cable connects the machine with the power supply system.
#
Stitch pattern summary card
It shows all stitch patterns at a glance.
#
3 Bobbins in the accessory, 1 bobbin in the bobbin case
The bobbins are filled with the lower thread.
#
Selection of needles
The needle assortment contains different versions and sizes of needles for all the common applications.
#
Height compensation tool
The height compensation tool levels an angled position of the presser foot sole when sliding over thick seams.
#
Seam ripper
The seam ripper is an indispensable tool to ando stitches or to cut buttonholes open.
#
Screwdriver red
The red screwdriver is supplied as an all-round tool.
#
Angular Torx wrench
Using the angular Torx wrench the headframe can be opened.
#
Brush
The brush is used to clean the feed dog and the hook area.
#
1 Foam pad
The foam pad prevents the thread from getting hooked at the spool pin.
#
3 Spool discs
Spool discs hold the thread spool in place for proper release of thread from the spool.
#
Programmable Foot control
Via the foot control the machine is started and stopped. The speed of the machine is also controlled via the foot control.
Note:
Not all models and accessories are available in all countries. We reserve the right to make changes in both features and design.