Standard accessories for BERNINA 435

#
4 Bobbins in the accessory, 1 bobbin in the bobbin case
The bobbins are filled with the lower thread.
#
1 Foam pad
The foam pad prevents the thread from getting hooked at the spool pin.
#
Selection of needles
The needle assortment contains different versions and sizes of needles for all the common applications.
#
Soft Cover with pocket
The soft cover protects from dust and contamination.
#
3 Spool discs
Spool discs hold the thread spool in place for proper release of thread from the spool.
#
Screwdriver red
The red screwdriver is supplied as an all-round tool.
#
Accessory bag
The accessory bag serves the purpose to store the supplied accessories as well as the optional accessories.
#
Seam ripper
The seam ripper is an indispensable tool to ando stitches or to cut buttonholes open.
#
Height compensation tool
The height compensation tool levels an angled position of the presser foot sole when sliding over thick seams.
#
Brush
The brush is used to clean the feed dog and the hook area.
#
Power cable
The power cable connects the machine with the power supply system.
#
Foot control
Via the foot control the machine is started and stopped. The speed of the machine is also controlled via the foot control. Always use the foot control of the type LV1 with this machine.
Note:
Not all models and accessories are available in all countries. We reserve the right to make changes in both features and design.