WiFi Device will not connect

After WiFi Device Setup:
    -The power LED is solid green
    -The WiFi LED is blinking blue
    -The state indicator is not lit

Possible solutions:
1. Make sure you are using the correct password for your Router or Access Point.
See also How To find WiFi password EN.pdf'. With the WiFi Device plugged to your computer and WiFi LED blinking, enter the password again under 'Configure selected - WiFi Settings'. Use the 'Show password' toggle to make sure it is entered correctly.
    
2. Do a factory reset of your WiFi Device.
Keep the reset button pressed until the state indicator turns white. See also Reset the device.
    
 3. Make sure your Router and/or Access Point allow communication between devices. Please refer to the reference manual of your Router and/or Access Point for this.