What is the correct procedure when the thread breaks?

1) If the thread can be seen at the needle, pull it out from there.
2) If the thread cannot be seen, remove the service cover, and remove the thread from this area.
3) Cutting the thread at the spool may be necessary to remove the thread from the machine.Refer to 'Troubleshooting' chapter in the user manual.

Pomohlo Vám to?

0 z 0 Užívatelia to považujú za užitočné

FAQ

Časté dotazy a odpovědi na ně.

Kliknutím sem získate prístup do sekcie FAQ