Sew Button Borders - two variants

Sew Button Borders - two variants

Button borders are more up tp date than ever and a lovely alternative to zips.
Get to know two different borders and learn how to change the button borders on your paper cutting pattern.
 
The cut button border

The cut button border

In the inspiration Magazine Nr. 01/21 we have designed the patterns of the dress 121-20 and the skirt 121-17 with a cut button border. This is the fastest and easiest way to sew a button border. Depending on the fabric used there is no need to iron on a stabiliser.

Procedure for very thick fabrics

Procedure for very thick fabrics

For very thick fabrics, the second weft is omitted (in the illustration the area to the left of the green line) and iron-on stabiliser is used instead.

The top edges of the button border disappear in the collar or the waistband and the hems are finished, ironed up and topstitched.

NOTE

In the illustrations, the right side of the fabric is shown darker, the wrong side lighter.
 

Iron the fold edges

Iron the fold edges

No allowance needs to be added at the outer edgeof the front cut. Fold the front partinwards twice – once at the fold line (green) and again at the “front edge” line (red). Narrow-topstitch the long edge.

The extra button border

The extra button border

It is made of a separate cut piece, such as on the blouse 121-12, and is sewn right side on right side to the front part. This makes sense if, for example, the fabric width is not large enough for a cut button border or if special effects, such as a different stripe pattern, are to be achieved.

The extra button border is also an advantage if the upper and lower edges cannot disappear into the hem, the collar, or the waistband. To do this, finish the upper and lower edges of the button border by sewing and turning over right away after having sewn the button border on the front part.

Easily change the paper cutting pattern

Easily change the paper cutting pattern

To change a pattern with cut facing into a pattern with extra button border, the paper cutting pattern can easily be changed.

  1. Measure the distance from the “front edge”  to the “centre front”.
  2. Draw a parallel of this width on the other side of the centre front.
  3. Cut the paper there.
  4. Detached strip forms the separate button border.
  5. Cut off weft (shown in grey) as well.

Fitting button sizes

Fitting button sizes

A button border should always be about twice as wide as the button. If buttons are used which are at least 2 mm larger or smaller than those indicated in the section, the distance from the centre front to the front edge and the facing width should be adjusted. The position of the front centre always remains unchanged!

 

Fancy some more inspiration?

Then sign up for the inspiration newsletter for free and never miss a new pattern again!

Subscribe to the newsletter